Shop our extensive online store or come visit our 17,000 square foot showroom and warehouse to shop in person!

L&L Vent-Sure

Sort by:
Sale
Vent-Sure for 120 Volts (primarily used in the USA)
Vent-Sure for 120 Volts (primarily used in the USA)

L&L Vent-Sure

€539.75 €635.00
{"id":1640918319167,"title":"Vent-Sure for 120 Volts (primarily used in the USA)","handle":"mvvent00","description":"PLEASE NOTE: This factory installed upgrade\/option is only available for purchase as an upgrade or with a new kiln. It cannot be ordered without ordering an L\u0026amp;L kiln. \u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e \u003c\/p\u003e\u003ch2\u003eA Critical Component In The Longevity Of Your Kiln!\u003c\/h2\u003e \u003cp\u003eThe Vent-Sure automatic kiln vent helps prevent corrosion on the inside and outside of your kiln. It ensures that your kiln gets the longest possible life from your elements and electrical components. This is so important that, if you do not have a Vent-Sure installed on your kiln, the pro-rated element warranty is in a different category.\u003c\/p\u003e \u003ch2\u003eVent Blower\u003c\/h2\u003e \u003cul\u003e \u003cul\u003e \u003cul\u003e \u003cli\u003eThe vent blower motor is normally mounted with the 12\" outlet protruding through the wall.\u003c\/li\u003e \u003c\/ul\u003e \u003c\/ul\u003e \u003c\/ul\u003e \u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0010\/1931\/4239\/files\/parts-vent-assembly-600_large.jpg?v=1548088297\" alt=\"L\u0026amp;L Vent-Sure Components\"\u003e\u003cbr\u003e \u003cul\u003e \u003cul\u003e \u003cul\u003e \u003cli\u003eThis keeps the heat of the kiln away from the motor (for long motor life) and keeps the motor vibration away from the kiln (which can cause ware to move, damage to the kiln, and misfiring of cones on a Kiln Sitter - if you have one).\u003c\/li\u003e \u003c\/ul\u003e \u003c\/ul\u003e \u003c\/ul\u003e \u003ch2\u003eVacuum Is Safer Than Pressure\u003c\/h2\u003e \u003cul\u003e \u003cul\u003e \u003cul\u003e \u003cli\u003eThe vent tubing is kept under vacuum instead of pressure.\u003c\/li\u003e \u003cli\u003eThis insures that any leak in the tubing does not blow noxious fumes into your room.\u003c\/li\u003e \u003c\/ul\u003e \u003c\/ul\u003e \u003c\/ul\u003e \u003ch2\u003eExternal Venting Is Better\u003c\/h2\u003e \u003cul\u003e \u003cul\u003e \u003cul\u003e \u003cli\u003eExternal venting is safer and surer than venting to the inside of your kiln room (even with a filter).\u003c\/li\u003e \u003c\/ul\u003e \u003c\/ul\u003e \u003c\/ul\u003e \u003ch2\u003eLarge Capacity\u003c\/h2\u003e \u003cul\u003e \u003cul\u003e \u003cul\u003e \u003cli\u003e\u003cstrong\u003eThe blower vents up to 130 CFM (cubic feet per minute).\u003c\/strong\u003e\u003c\/li\u003e \u003cli\u003eThis will handle up to a 20 cubic foot kiln (and usually larger). More than one vent can be attached to a kiln.\u003c\/li\u003e \u003c\/ul\u003e \u003c\/ul\u003e \u003c\/ul\u003e \u003ch2\u003eMinimal Electrical Power Needed\u003c\/h2\u003e \u003cul\u003e \u003cul\u003e \u003cul\u003e \u003cli\u003eThe motor only pulls 1.37 amps.\u003c\/li\u003e \u003c\/ul\u003e \u003c\/ul\u003e \u003c\/ul\u003e \u003ch2\u003eSix Foot Power Cord With On\/Off Switch\u003c\/h2\u003e \u003cul\u003e \u003cul\u003e \u003cul\u003e \u003cli\u003eThe blower motor features a 6 foot long 120 volt 15 amp power cord. An On\/Off switch is located on the cord.\u003c\/li\u003e \u003cli\u003e240 volt models are available.\u003c\/li\u003e \u003c\/ul\u003e \u003c\/ul\u003e \u003c\/ul\u003e \u003ch2\u003eAdjustable Vent Control\u003c\/h2\u003e \u003cul\u003e \u003cul\u003e \u003cli\u003eA vacuum bypass on the kiln bypass\/collection box adjusts the amount of venting from the system.\u003c\/li\u003e \u003cli\u003eDon’t waste heat and energy by venting more than you need.\u003c\/li\u003e \u003cli\u003eAdjust vent to kiln size.\u003c\/li\u003e \u003c\/ul\u003e \u003c\/ul\u003e \u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0010\/1931\/4239\/files\/parts-vent-bypass-box-600_large.jpg?v=1548088297\" alt=\"Vent-Sure Collection Box\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0010\/1931\/4239\/files\/feature-stand-vent-bypass-box-no-hose-950_large.jpg?v=1548088296\" alt=\"Vent-Sure Collection Box\"\u003e\u003c\/p\u003e \u003cmeta charset=\"utf-8\"\u003e \u003ch2\u003e15 Feet Of Flexible Aluminum Duct\u003c\/h2\u003e \u003cul\u003e \u003cli\u003e15 feet of flexible expandable aluminum 3\" diameter duct is included along with necessary hose clamps.\u003c\/li\u003e \u003cli\u003eLonger lengths or lengths of 3\" stove pipe can be used as well.\u003c\/li\u003e \u003cli\u003eLength can be as great as 60 feet horizontal or vertical with up to four 90 degree bends.\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003eThree Year Limited Warranty\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eBecause of our unique wall-mount fan we rarely replace fan motors.\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003eMET Listed To UL499 Standards\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eThe VENT-SURE Model VS-1 is\u003cspan\u003e \u003c\/span\u003ec-MET-us\u003cspan\u003e \u003c\/span\u003elisted for use with all c-MET-us listed L\u0026amp;L kilns. It is MET-us listed for all MET-us listed L\u0026amp;L kilns.\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003eOptional Multi-Mounting Bracket\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eA special\u003cspan\u003e \u003c\/span\u003eMulti-mounting bracket (M-V-MULT\/00)\u003cspan\u003e \u003c\/span\u003eis available to mount the vent motor on the floor or point the outlet vertically for ceiling installations.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0010\/1931\/4239\/files\/part-vent-multi-bracket-600_large.jpg?v=1548088296\" alt=\"Vent-Sure Floor Mounting Bracket\"\u003e\u003c\/p\u003e \u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0010\/1931\/4239\/files\/accessories-vent-on-kiln-950_large.jpg?v=1548088297\" alt=\"Vent-Sure Floor Mounting Bracket Installed\"\u003e\u003c\/p\u003e \u003cmeta charset=\"utf-8\"\u003e \u003ch2\u003eOptional Vent Doubler\u003c\/h2\u003e \u003cp\u003eYou can get a\u003cspan\u003e \u003c\/span\u003eVent Doubler option (M-V-VENT\/DB)\u003cspan\u003e \u003c\/span\u003ewhich allow you to vent two kilns that are each up to 10 cubic feet.\u003c\/p\u003e \u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0010\/1931\/4239\/files\/accessories-vent-double-600_large.jpg?v=1548088296\" alt=\"Vent-Sure Vent Doubler\"\u003e\u003c\/p\u003e \u003cmeta charset=\"utf-8\"\u003e \u003ch2\u003eOptional Vent Controller To Turn Vent On And Off With DynaTrol\u003c\/h2\u003e \u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0010\/1931\/4239\/files\/accessory-vent-control-950_large.jpg?v=1548088297\" alt=\"Vent Controller\"\u003e\u003c\/p\u003e \u003cmeta charset=\"utf-8\"\u003e \u003cul\u003e \u003cli\u003eThe Vent Control will allow you to program the vent motor to turn on and off during the firing cycle.\u003c\/li\u003e \u003c\/ul\u003e \u003ch1 class=\"title\"\u003eVent-Sure for 120 Volts (primarily used in the USA)\u003c\/h1\u003e \u003cp\u003eThis is the complete 120 volt Vent-Sure System.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWHAT IS INCLUDED:\u003c\/strong\u003e\u003c\/p\u003e \u003col\u003e \u003cli\u003e\u003cspan\u003eOne wall-mounted blower mounted on a bracket with a 12\" long vent pipe to go through outside wall\u003c\/span\u003e\u003c\/li\u003e \u003cli\u003e\u003cspan\u003eOne Motor Inlet Duct\u003c\/span\u003e\u003c\/li\u003e \u003cli\u003e\u003cspan\u003eAn 6 foot power cord with an attached On\/Off switch plugs into a 120 volt standard receptacle\u003c\/span\u003e\u003c\/li\u003e \u003cli\u003e\u003cspan\u003eOne Bypass Collection Box to be mounted to the kiln or on the kiln stand, with mounting hardware\u003c\/span\u003e\u003c\/li\u003e \u003cli\u003e\n\u003cspan\u003eOne length of flexible aluminum ducting (expands to 15 feet) with two \u003c\/span\u003e\u003cspan\u003ehose clamps\u003c\/span\u003e\n\u003c\/li\u003e \u003cli\u003e\u003cspan\u003eOne 4” diameter 90 degree elbow (for outside the building)\u003c\/span\u003e\u003c\/li\u003e \u003c\/ol\u003e \u003cp\u003eModel: M-V-VENT\/00\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNOTE: Vents made by manufacturers other than L\u0026amp;L may not be listed to UL499 standards if used with an L\u0026amp;L kiln. The same is true in reverse - the L\u0026amp;L Vent-Sure is listed to UL499 standards only with L\u0026amp;L listed kilns. If you have any question please contact the manufacturer of your non-L\u0026amp;L vent system.\u003c\/strong\u003e\u003c\/p\u003e \u003cmeta charset=\"utf-8\"\u003e \u003cp\u003e\u003ca target=\"_blank\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0010\/1931\/4239\/files\/Spec-Vent-Sure-2017.pdf?15073856172741737598\" rel=\"noopener noreferrer\"\u003eClick here for Specification Sheet\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca target=\"_blank\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0010\/1931\/4239\/files\/ventsure-instruct-print-11-1-2017.pdf?15073856172741737598\" rel=\"noopener noreferrer\"\u003eClick here for Instruction Manual\u003c\/a\u003e\u003c\/p\u003e \u003cul\u003e\u003c\/ul\u003e","published_at":"2019-01-22T17:07:58-06:00","created_at":"2019-01-22T17:07:59-06:00","vendor":"L\u0026L Kilns","type":"L\u0026L Vent-Sure","tags":[],"price":53975,"price_min":53975,"price_max":53975,"available":true,"price_varies":false,"compare_at_price":63500,"compare_at_price_min":63500,"compare_at_price_max":63500,"compare_at_price_varies":false,"variants":[{"id":13994103963711,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MVVENT00","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Vent-Sure for 120 Volts (primarily used in the USA)","public_title":null,"options":["Default Title"],"price":53975,"weight":454,"compare_at_price":63500,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/dulcemielevents.com\/cdn\/shop\/products\/accessories-vent-600_87c53b29-f10a-443a-8822-05559f31caab.jpg?v=1684767037","\/\/dulcemielevents.com\/cdn\/shop\/products\/accessories-installation-diagram-950_aa91a61f-a5b8-440f-a76f-a803601cd252.jpg?v=1684767037"],"featured_image":"\/\/dulcemielevents.com\/cdn\/shop\/products\/accessories-vent-600_87c53b29-f10a-443a-8822-05559f31caab.jpg?v=1684767037","options":["Title"],"media":[{"alt":null,"id":23439847489599,"position":1,"preview_image":{"aspect_ratio":1.181,"height":254,"width":300,"src":"\/\/dulcemielevents.com\/cdn\/shop\/products\/accessories-vent-600_87c53b29-f10a-443a-8822-05559f31caab.jpg?v=1684767037"},"aspect_ratio":1.181,"height":254,"media_type":"image","src":"\/\/dulcemielevents.com\/cdn\/shop\/products\/accessories-vent-600_87c53b29-f10a-443a-8822-05559f31caab.jpg?v=1684767037","width":300},{"alt":null,"id":23439847522367,"position":2,"preview_image":{"aspect_ratio":0.97,"height":979,"width":950,"src":"\/\/dulcemielevents.com\/cdn\/shop\/products\/accessories-installation-diagram-950_aa91a61f-a5b8-440f-a76f-a803601cd252.jpg?v=1684767037"},"aspect_ratio":0.97,"height":979,"media_type":"image","src":"\/\/dulcemielevents.com\/cdn\/shop\/products\/accessories-installation-diagram-950_aa91a61f-a5b8-440f-a76f-a803601cd252.jpg?v=1684767037","width":950}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"PLEASE NOTE: This factory installed upgrade\/option is only available for purchase as an upgrade or with a new kiln. It cannot be ordered without ordering an L\u0026amp;L kiln. \u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e \u003c\/p\u003e\u003ch2\u003eA Critical Component In The Longevity Of Your Kiln!\u003c\/h2\u003e \u003cp\u003eThe Vent-Sure automatic kiln vent helps prevent corrosion on the inside and outside of your kiln. It ensures that your kiln gets the longest possible life from your elements and electrical components. This is so important that, if you do not have a Vent-Sure installed on your kiln, the pro-rated element warranty is in a different category.\u003c\/p\u003e \u003ch2\u003eVent Blower\u003c\/h2\u003e \u003cul\u003e \u003cul\u003e \u003cul\u003e \u003cli\u003eThe vent blower motor is normally mounted with the 12\" outlet protruding through the wall.\u003c\/li\u003e \u003c\/ul\u003e \u003c\/ul\u003e \u003c\/ul\u003e \u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0010\/1931\/4239\/files\/parts-vent-assembly-600_large.jpg?v=1548088297\" alt=\"L\u0026amp;L Vent-Sure Components\"\u003e\u003cbr\u003e \u003cul\u003e \u003cul\u003e \u003cul\u003e \u003cli\u003eThis keeps the heat of the kiln away from the motor (for long motor life) and keeps the motor vibration away from the kiln (which can cause ware to move, damage to the kiln, and misfiring of cones on a Kiln Sitter - if you have one).\u003c\/li\u003e \u003c\/ul\u003e \u003c\/ul\u003e \u003c\/ul\u003e \u003ch2\u003eVacuum Is Safer Than Pressure\u003c\/h2\u003e \u003cul\u003e \u003cul\u003e \u003cul\u003e \u003cli\u003eThe vent tubing is kept under vacuum instead of pressure.\u003c\/li\u003e \u003cli\u003eThis insures that any leak in the tubing does not blow noxious fumes into your room.\u003c\/li\u003e \u003c\/ul\u003e \u003c\/ul\u003e \u003c\/ul\u003e \u003ch2\u003eExternal Venting Is Better\u003c\/h2\u003e \u003cul\u003e \u003cul\u003e \u003cul\u003e \u003cli\u003eExternal venting is safer and surer than venting to the inside of your kiln room (even with a filter).\u003c\/li\u003e \u003c\/ul\u003e \u003c\/ul\u003e \u003c\/ul\u003e \u003ch2\u003eLarge Capacity\u003c\/h2\u003e \u003cul\u003e \u003cul\u003e \u003cul\u003e \u003cli\u003e\u003cstrong\u003eThe blower vents up to 130 CFM (cubic feet per minute).\u003c\/strong\u003e\u003c\/li\u003e \u003cli\u003eThis will handle up to a 20 cubic foot kiln (and usually larger). More than one vent can be attached to a kiln.\u003c\/li\u003e \u003c\/ul\u003e \u003c\/ul\u003e \u003c\/ul\u003e \u003ch2\u003eMinimal Electrical Power Needed\u003c\/h2\u003e \u003cul\u003e \u003cul\u003e \u003cul\u003e \u003cli\u003eThe motor only pulls 1.37 amps.\u003c\/li\u003e \u003c\/ul\u003e \u003c\/ul\u003e \u003c\/ul\u003e \u003ch2\u003eSix Foot Power Cord With On\/Off Switch\u003c\/h2\u003e \u003cul\u003e \u003cul\u003e \u003cul\u003e \u003cli\u003eThe blower motor features a 6 foot long 120 volt 15 amp power cord. An On\/Off switch is located on the cord.\u003c\/li\u003e \u003cli\u003e240 volt models are available.\u003c\/li\u003e \u003c\/ul\u003e \u003c\/ul\u003e \u003c\/ul\u003e \u003ch2\u003eAdjustable Vent Control\u003c\/h2\u003e \u003cul\u003e \u003cul\u003e \u003cli\u003eA vacuum bypass on the kiln bypass\/collection box adjusts the amount of venting from the system.\u003c\/li\u003e \u003cli\u003eDon’t waste heat and energy by venting more than you need.\u003c\/li\u003e \u003cli\u003eAdjust vent to kiln size.\u003c\/li\u003e \u003c\/ul\u003e \u003c\/ul\u003e \u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0010\/1931\/4239\/files\/parts-vent-bypass-box-600_large.jpg?v=1548088297\" alt=\"Vent-Sure Collection Box\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0010\/1931\/4239\/files\/feature-stand-vent-bypass-box-no-hose-950_large.jpg?v=1548088296\" alt=\"Vent-Sure Collection Box\"\u003e\u003c\/p\u003e \u003cmeta charset=\"utf-8\"\u003e \u003ch2\u003e15 Feet Of Flexible Aluminum Duct\u003c\/h2\u003e \u003cul\u003e \u003cli\u003e15 feet of flexible expandable aluminum 3\" diameter duct is included along with necessary hose clamps.\u003c\/li\u003e \u003cli\u003eLonger lengths or lengths of 3\" stove pipe can be used as well.\u003c\/li\u003e \u003cli\u003eLength can be as great as 60 feet horizontal or vertical with up to four 90 degree bends.\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003eThree Year Limited Warranty\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eBecause of our unique wall-mount fan we rarely replace fan motors.\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003eMET Listed To UL499 Standards\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eThe VENT-SURE Model VS-1 is\u003cspan\u003e \u003c\/span\u003ec-MET-us\u003cspan\u003e \u003c\/span\u003elisted for use with all c-MET-us listed L\u0026amp;L kilns. It is MET-us listed for all MET-us listed L\u0026amp;L kilns.\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003eOptional Multi-Mounting Bracket\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eA special\u003cspan\u003e \u003c\/span\u003eMulti-mounting bracket (M-V-MULT\/00)\u003cspan\u003e \u003c\/span\u003eis available to mount the vent motor on the floor or point the outlet vertically for ceiling installations.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0010\/1931\/4239\/files\/part-vent-multi-bracket-600_large.jpg?v=1548088296\" alt=\"Vent-Sure Floor Mounting Bracket\"\u003e\u003c\/p\u003e \u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0010\/1931\/4239\/files\/accessories-vent-on-kiln-950_large.jpg?v=1548088297\" alt=\"Vent-Sure Floor Mounting Bracket Installed\"\u003e\u003c\/p\u003e \u003cmeta charset=\"utf-8\"\u003e \u003ch2\u003eOptional Vent Doubler\u003c\/h2\u003e \u003cp\u003eYou can get a\u003cspan\u003e \u003c\/span\u003eVent Doubler option (M-V-VENT\/DB)\u003cspan\u003e \u003c\/span\u003ewhich allow you to vent two kilns that are each up to 10 cubic feet.\u003c\/p\u003e \u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0010\/1931\/4239\/files\/accessories-vent-double-600_large.jpg?v=1548088296\" alt=\"Vent-Sure Vent Doubler\"\u003e\u003c\/p\u003e \u003cmeta charset=\"utf-8\"\u003e \u003ch2\u003eOptional Vent Controller To Turn Vent On And Off With DynaTrol\u003c\/h2\u003e \u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0010\/1931\/4239\/files\/accessory-vent-control-950_large.jpg?v=1548088297\" alt=\"Vent Controller\"\u003e\u003c\/p\u003e \u003cmeta charset=\"utf-8\"\u003e \u003cul\u003e \u003cli\u003eThe Vent Control will allow you to program the vent motor to turn on and off during the firing cycle.\u003c\/li\u003e \u003c\/ul\u003e \u003ch1 class=\"title\"\u003eVent-Sure for 120 Volts (primarily used in the USA)\u003c\/h1\u003e \u003cp\u003eThis is the complete 120 volt Vent-Sure System.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWHAT IS INCLUDED:\u003c\/strong\u003e\u003c\/p\u003e \u003col\u003e \u003cli\u003e\u003cspan\u003eOne wall-mounted blower mounted on a bracket with a 12\" long vent pipe to go through outside wall\u003c\/span\u003e\u003c\/li\u003e \u003cli\u003e\u003cspan\u003eOne Motor Inlet Duct\u003c\/span\u003e\u003c\/li\u003e \u003cli\u003e\u003cspan\u003eAn 6 foot power cord with an attached On\/Off switch plugs into a 120 volt standard receptacle\u003c\/span\u003e\u003c\/li\u003e \u003cli\u003e\u003cspan\u003eOne Bypass Collection Box to be mounted to the kiln or on the kiln stand, with mounting hardware\u003c\/span\u003e\u003c\/li\u003e \u003cli\u003e\n\u003cspan\u003eOne length of flexible aluminum ducting (expands to 15 feet) with two \u003c\/span\u003e\u003cspan\u003ehose clamps\u003c\/span\u003e\n\u003c\/li\u003e \u003cli\u003e\u003cspan\u003eOne 4” diameter 90 degree elbow (for outside the building)\u003c\/span\u003e\u003c\/li\u003e \u003c\/ol\u003e \u003cp\u003eModel: M-V-VENT\/00\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNOTE: Vents made by manufacturers other than L\u0026amp;L may not be listed to UL499 standards if used with an L\u0026amp;L kiln. The same is true in reverse - the L\u0026amp;L Vent-Sure is listed to UL499 standards only with L\u0026amp;L listed kilns. If you have any question please contact the manufacturer of your non-L\u0026amp;L vent system.\u003c\/strong\u003e\u003c\/p\u003e \u003cmeta charset=\"utf-8\"\u003e \u003cp\u003e\u003ca target=\"_blank\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0010\/1931\/4239\/files\/Spec-Vent-Sure-2017.pdf?15073856172741737598\" rel=\"noopener noreferrer\"\u003eClick here for Specification Sheet\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca target=\"_blank\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0010\/1931\/4239\/files\/ventsure-instruct-print-11-1-2017.pdf?15073856172741737598\" rel=\"noopener noreferrer\"\u003eClick here for Instruction Manual\u003c\/a\u003e\u003c\/p\u003e \u003cul\u003e\u003c\/ul\u003e"}
Vent-Sure for 120 Volts (primarily used in the USA)

Vent-Sure for 120 Volts (primarily used in the USA)

€539.75 €635.00

PLEASE NOTE: This factory installed upgrade/option is only available for purchase as an upgrade or with a new kiln. It cannot be ordered without ordering an L&L kiln. A Critical Component In The Longevity Of Your Kiln! The Vent-Sure automatic kiln vent helps prevent corrosion on the inside and outside of your kiln. It ensures that your kiln...


More Info
Vent-Control for Vent-Sure

L&L Vent-Sure

€180.00
{"id":1640918253631,"title":"Vent-Control for Vent-Sure","handle":"mvcntl00","description":"PLEASE NOTE: This factory installed upgrade\/option is only available for purchase as an upgrade or with a new kiln. It cannot be ordered without ordering an L\u0026amp;L kiln. \u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e \u003c\/p\u003e\u003ch1 class=\"title\"\u003eVent-Control for Vent-Sure\u003c\/h1\u003e \u003cp\u003eThe vent control allows you to automatically control the operation of the Vent-Sure kiln vent with one of the outputs from the DynaTrol.\u003c\/p\u003e \u003ch2\u003eConstruction\u003c\/h2\u003e \u003col\u003e \u003cli\u003eIt consists of a relay that is controlled from output #4 on the DynaTrol.\u003c\/li\u003e \u003cli\u003eThere is a femalE 120 volt receptacle to plug the vent into and a cord to plug into a 120 volt wall outlet.\u003c\/li\u003e \u003cli\u003ePhysical construction varies by model number.\u003c\/li\u003e \u003c\/ol\u003e \u003ch2\u003eWhere It Can Be Used\u003c\/h2\u003e \u003col\u003e \u003cli\u003eIt is only available for kilns with DynaTrols.\u003c\/li\u003e \u003cli\u003eIt may not be used with kilns with powered bottoms (because the same output on the control is used)\u003c\/li\u003e \u003c\/ol\u003e \u003cp\u003eModel: M-V-CNTL\/00\u003c\/p\u003e","published_at":"2019-01-22T17:07:55-06:00","created_at":"2019-01-22T17:07:56-06:00","vendor":"L\u0026L Kilns","type":"L\u0026L Vent-Sure","tags":[],"price":18000,"price_min":18000,"price_max":18000,"available":true,"price_varies":false,"compare_at_price":18000,"compare_at_price_min":18000,"compare_at_price_max":18000,"compare_at_price_varies":false,"variants":[{"id":13994103898175,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MVCNTL00","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Vent-Control for Vent-Sure","public_title":null,"options":["Default Title"],"price":18000,"weight":454,"compare_at_price":18000,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/dulcemielevents.com\/cdn\/shop\/products\/accessory-vent-control-950.jpg?v=1684767034"],"featured_image":"\/\/dulcemielevents.com\/cdn\/shop\/products\/accessory-vent-control-950.jpg?v=1684767034","options":["Title"],"media":[{"alt":null,"id":23439847456831,"position":1,"preview_image":{"aspect_ratio":1.291,"height":736,"width":950,"src":"\/\/dulcemielevents.com\/cdn\/shop\/products\/accessory-vent-control-950.jpg?v=1684767034"},"aspect_ratio":1.291,"height":736,"media_type":"image","src":"\/\/dulcemielevents.com\/cdn\/shop\/products\/accessory-vent-control-950.jpg?v=1684767034","width":950}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"PLEASE NOTE: This factory installed upgrade\/option is only available for purchase as an upgrade or with a new kiln. It cannot be ordered without ordering an L\u0026amp;L kiln. \u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e \u003c\/p\u003e\u003ch1 class=\"title\"\u003eVent-Control for Vent-Sure\u003c\/h1\u003e \u003cp\u003eThe vent control allows you to automatically control the operation of the Vent-Sure kiln vent with one of the outputs from the DynaTrol.\u003c\/p\u003e \u003ch2\u003eConstruction\u003c\/h2\u003e \u003col\u003e \u003cli\u003eIt consists of a relay that is controlled from output #4 on the DynaTrol.\u003c\/li\u003e \u003cli\u003eThere is a femalE 120 volt receptacle to plug the vent into and a cord to plug into a 120 volt wall outlet.\u003c\/li\u003e \u003cli\u003ePhysical construction varies by model number.\u003c\/li\u003e \u003c\/ol\u003e \u003ch2\u003eWhere It Can Be Used\u003c\/h2\u003e \u003col\u003e \u003cli\u003eIt is only available for kilns with DynaTrols.\u003c\/li\u003e \u003cli\u003eIt may not be used with kilns with powered bottoms (because the same output on the control is used)\u003c\/li\u003e \u003c\/ol\u003e \u003cp\u003eModel: M-V-CNTL\/00\u003c\/p\u003e"}
Vent-Control for Vent-Sure

Vent-Control for Vent-Sure

€180.00

PLEASE NOTE: This factory installed upgrade/option is only available for purchase as an upgrade or with a new kiln. It cannot be ordered without ordering an L&L kiln. Vent-Control for Vent-Sure The vent control allows you to automatically control the operation of the Vent-Sure kiln vent with one of the outputs from the DynaTrol. Constructio...


More Info
Sale
Vent Doubler for venting two kilns with one vent
Vent Doubler for venting two kilns with one vent

L&L Vent-Sure

€175.50 €195.00
{"id":1640918351935,"title":"Vent Doubler for venting two kilns with one vent","handle":"mvventdb","description":"PLEASE NOTE: This factory installed upgrade\/option is only available for purchase as an upgrade or with a new kiln. It cannot be ordered without ordering an L\u0026amp;L kiln. \u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e \u003c\/p\u003e\u003ch1\u003eVent Doubler for venting two kilns with one vent\u003c\/h1\u003e \u003ch2\u003eVENT TWO KILNS\u003c\/h2\u003e \u003col\u003e \u003cli\u003eThis accessory allows you to connect two kilns to a Vent-Sure vent system.\u003c\/li\u003e \u003cli\u003eIt can be added to an existing vent system or can be ordered with a new vent.\u003c\/li\u003e \u003cli\u003eIn some cases you may be able to fire two kilns at once. The Vent-Sure has enough force to vent at least 20 cubic feet of kiln. That means, for instance, that two e28T-3 kilns could be vented while firing at the same time.\u003c\/li\u003e \u003cli\u003eThe \"T\" duct fitting attaches to the inlet of the fan motor. There are two dampers on it to allow you to both control the flow and to shut off one or the other kiln.\u003c\/li\u003e \u003cli\u003eFlexible aluminum dryer duct goes between the ends of this \"T\" duct and the two fittings that attach to the kiln stands.\u003c\/li\u003e \u003c\/ol\u003e \u003ch2\u003eWHAT THE OPTIONAL “VENT-DOUBLER” INCLUDES\u003c\/h2\u003e \u003col\u003e \u003cli\u003eOne 3\" galvanized \"T\" duct fitting with dampers with self-drilling screws to attach it to the motor assembly\u003c\/li\u003e \u003cli\u003eOne extra Collection Box with slide damper\u003c\/li\u003e \u003cli\u003eOne extra 15' Flexible Aluminum Duct (one is normally included with the Vent-Sure).\u003c\/li\u003e \u003cli\u003eThere are two clamps per Flexible Duct Assembly One Floor\/Wall bracket.\u003c\/li\u003e \u003c\/ol\u003e \u003ch2\u003eNOTE ABOUT PHOTO\u003c\/h2\u003e \u003col\u003e \u003cli\u003eThe product photo shows an entire installation to illustrate how the system is put together. The Vent Doubling System does not include stands or the Multi-Mounting Bracket. It only includes what is mentioned above. (Consider buying a Multi-Mounting Bracket if you need to install the system like the photograph shows).\u003c\/li\u003e \u003c\/ol\u003e \u003cdiv\u003e\u003c\/div\u003e \u003cdiv\u003e \u003cdiv\u003e \u003cp\u003eModel: M-V-VENT\/DB\u003c\/p\u003e \u003c\/div\u003e \u003c\/div\u003e","published_at":"2019-01-22T17:07:59-06:00","created_at":"2019-01-22T17:08:00-06:00","vendor":"L\u0026L Kilns","type":"L\u0026L Vent-Sure","tags":[],"price":17550,"price_min":17550,"price_max":17550,"available":true,"price_varies":false,"compare_at_price":19500,"compare_at_price_min":19500,"compare_at_price_max":19500,"compare_at_price_varies":false,"variants":[{"id":13994103996479,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MVVENTDB","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Vent Doubler for venting two kilns with one vent","public_title":null,"options":["Default Title"],"price":17550,"weight":454,"compare_at_price":19500,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/dulcemielevents.com\/cdn\/shop\/products\/accessories-vent-double-600.jpg?v=1684767039"],"featured_image":"\/\/dulcemielevents.com\/cdn\/shop\/products\/accessories-vent-double-600.jpg?v=1684767039","options":["Title"],"media":[{"alt":null,"id":23439848407103,"position":1,"preview_image":{"aspect_ratio":1.235,"height":486,"width":600,"src":"\/\/dulcemielevents.com\/cdn\/shop\/products\/accessories-vent-double-600.jpg?v=1684767039"},"aspect_ratio":1.235,"height":486,"media_type":"image","src":"\/\/dulcemielevents.com\/cdn\/shop\/products\/accessories-vent-double-600.jpg?v=1684767039","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"PLEASE NOTE: This factory installed upgrade\/option is only available for purchase as an upgrade or with a new kiln. It cannot be ordered without ordering an L\u0026amp;L kiln. \u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e \u003c\/p\u003e\u003ch1\u003eVent Doubler for venting two kilns with one vent\u003c\/h1\u003e \u003ch2\u003eVENT TWO KILNS\u003c\/h2\u003e \u003col\u003e \u003cli\u003eThis accessory allows you to connect two kilns to a Vent-Sure vent system.\u003c\/li\u003e \u003cli\u003eIt can be added to an existing vent system or can be ordered with a new vent.\u003c\/li\u003e \u003cli\u003eIn some cases you may be able to fire two kilns at once. The Vent-Sure has enough force to vent at least 20 cubic feet of kiln. That means, for instance, that two e28T-3 kilns could be vented while firing at the same time.\u003c\/li\u003e \u003cli\u003eThe \"T\" duct fitting attaches to the inlet of the fan motor. There are two dampers on it to allow you to both control the flow and to shut off one or the other kiln.\u003c\/li\u003e \u003cli\u003eFlexible aluminum dryer duct goes between the ends of this \"T\" duct and the two fittings that attach to the kiln stands.\u003c\/li\u003e \u003c\/ol\u003e \u003ch2\u003eWHAT THE OPTIONAL “VENT-DOUBLER” INCLUDES\u003c\/h2\u003e \u003col\u003e \u003cli\u003eOne 3\" galvanized \"T\" duct fitting with dampers with self-drilling screws to attach it to the motor assembly\u003c\/li\u003e \u003cli\u003eOne extra Collection Box with slide damper\u003c\/li\u003e \u003cli\u003eOne extra 15' Flexible Aluminum Duct (one is normally included with the Vent-Sure).\u003c\/li\u003e \u003cli\u003eThere are two clamps per Flexible Duct Assembly One Floor\/Wall bracket.\u003c\/li\u003e \u003c\/ol\u003e \u003ch2\u003eNOTE ABOUT PHOTO\u003c\/h2\u003e \u003col\u003e \u003cli\u003eThe product photo shows an entire installation to illustrate how the system is put together. The Vent Doubling System does not include stands or the Multi-Mounting Bracket. It only includes what is mentioned above. (Consider buying a Multi-Mounting Bracket if you need to install the system like the photograph shows).\u003c\/li\u003e \u003c\/ol\u003e \u003cdiv\u003e\u003c\/div\u003e \u003cdiv\u003e \u003cdiv\u003e \u003cp\u003eModel: M-V-VENT\/DB\u003c\/p\u003e \u003c\/div\u003e \u003c\/div\u003e"}
Vent Doubler for venting two kilns with one vent

Vent Doubler for venting two kilns with one vent

€175.50 €195.00

PLEASE NOTE: This factory installed upgrade/option is only available for purchase as an upgrade or with a new kiln. It cannot be ordered without ordering an L&L kiln. Vent Doubler for venting two kilns with one vent VENT TWO KILNS This accessory allows you to connect two kilns to a Vent-Sure vent system. It can be added to an existing vent...


More Info
Sale
Vent-Sure for 220-240 Volts (Usually non-USA)
Vent-Sure for 220-240 Volts (Usually non-USA)

L&L Vent-Sure

€616.25 €725.00
{"id":1640918384703,"title":"Vent-Sure for 220-240 Volts (Usually non-USA)","handle":"mvventeu","description":"PLEASE NOTE: This factory installed upgrade\/option is only available for purchase as an upgrade or with a new kiln. It cannot be ordered without ordering an L\u0026amp;L kiln. \u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e \u003c\/p\u003e\u003ch2\u003eA Critical Component In The Longevity Of Your Kiln!\u003c\/h2\u003e \u003cp\u003eThe Vent-Sure automatic kiln vent helps prevent corrosion on the inside and outside of your kiln. It ensures that your kiln gets the longest possible life from your elements and electrical components. This is so important that, if you do not have a Vent-Sure installed on your kiln, the pro-rated element warranty is in a different category.\u003c\/p\u003e \u003ch2\u003eVent Blower\u003c\/h2\u003e \u003cul\u003e \u003cul\u003e \u003cul\u003e \u003cli\u003eThe vent blower motor is normally mounted with the 12\" outlet protruding through the wall.\u003c\/li\u003e \u003c\/ul\u003e \u003c\/ul\u003e \u003c\/ul\u003e \u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0010\/1931\/4239\/files\/parts-vent-assembly-600_large.jpg?v=1548088297\" alt=\"L\u0026amp;L Vent-Sure Components\"\u003e\u003cbr\u003e \u003cul\u003e \u003cul\u003e \u003cul\u003e \u003cli\u003eThis keeps the heat of the kiln away from the motor (for long motor life) and keeps the motor vibration away from the kiln (which can cause ware to move, damage to the kiln, and misfiring of cones on a Kiln Sitter - if you have one).\u003c\/li\u003e \u003c\/ul\u003e \u003c\/ul\u003e \u003c\/ul\u003e \u003ch2\u003eVacuum Is Safer Than Pressure\u003c\/h2\u003e \u003cul\u003e \u003cul\u003e \u003cul\u003e \u003cli\u003eThe vent tubing is kept under vacuum instead of pressure.\u003c\/li\u003e \u003cli\u003eThis insures that any leak in the tubing does not blow noxious fumes into your room.\u003c\/li\u003e \u003c\/ul\u003e \u003c\/ul\u003e \u003c\/ul\u003e \u003ch2\u003eExternal Venting Is Better\u003c\/h2\u003e \u003cul\u003e \u003cul\u003e \u003cul\u003e \u003cli\u003eExternal venting is safer and surer than venting to the inside of your kiln room (even with a filter).\u003c\/li\u003e \u003c\/ul\u003e \u003c\/ul\u003e \u003c\/ul\u003e \u003ch2\u003eLarge Capacity\u003c\/h2\u003e \u003cul\u003e \u003cul\u003e \u003cul\u003e \u003cli\u003e\u003cstrong\u003eThe blower vents up to 130 CFM (cubic feet per minute).\u003c\/strong\u003e\u003c\/li\u003e \u003cli\u003eThis will handle up to a 20 cubic foot kiln (and usually larger). More than one vent can be attached to a kiln.\u003c\/li\u003e \u003c\/ul\u003e \u003c\/ul\u003e \u003c\/ul\u003e \u003ch2\u003eMinimal Electrical Power Needed\u003c\/h2\u003e \u003cul\u003e \u003cul\u003e \u003cul\u003e \u003cli\u003eThe motor only pulls 1.37 amps.\u003c\/li\u003e \u003c\/ul\u003e \u003c\/ul\u003e \u003c\/ul\u003e \u003ch2\u003eSix Foot Power Cord With On\/Off Switch\u003c\/h2\u003e \u003cul\u003e \u003cul\u003e \u003cul\u003e \u003cli\u003eThe blower motor features a 6 foot long 120 volt 15 amp power cord. An On\/Off switch is located on the cord.\u003c\/li\u003e \u003cli\u003e240 volt models are available.\u003c\/li\u003e \u003c\/ul\u003e \u003c\/ul\u003e \u003c\/ul\u003e \u003ch2\u003eAdjustable Vent Control\u003c\/h2\u003e \u003cul\u003e \u003cul\u003e \u003cli\u003eA vacuum bypass on the kiln bypass\/collection box adjusts the amount of venting from the system.\u003c\/li\u003e \u003cli\u003eDon’t waste heat and energy by venting more than you need.\u003c\/li\u003e \u003cli\u003eAdjust vent to kiln size.\u003c\/li\u003e \u003c\/ul\u003e \u003c\/ul\u003e \u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0010\/1931\/4239\/files\/parts-vent-bypass-box-600_large.jpg?v=1548088297\" alt=\"Vent-Sure Collection Box\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0010\/1931\/4239\/files\/feature-stand-vent-bypass-box-no-hose-950_large.jpg?v=1548088296\" alt=\"Vent-Sure Collection Box\"\u003e\u003c\/p\u003e \u003cmeta charset=\"utf-8\"\u003e \u003ch2\u003e15 Feet Of Flexible Aluminum Duct\u003c\/h2\u003e \u003cul\u003e \u003cli\u003e15 feet of flexible expandable aluminum 3\" diameter duct is included along with necessary hose clamps.\u003c\/li\u003e \u003cli\u003eLonger lengths or lengths of 3\" stove pipe can be used as well.\u003c\/li\u003e \u003cli\u003eLength can be as great as 60 feet horizontal or vertical with up to four 90 degree bends.\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003eThree Year Limited Warranty\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eBecause of our unique wall-mount fan we rarely replace fan motors.\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003eMET Listed To UL499 Standards\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eThe VENT-SURE Model VS-1 is\u003cspan\u003e \u003c\/span\u003ec-MET-us\u003cspan\u003e \u003c\/span\u003elisted for use with all c-MET-us listed L\u0026amp;L kilns. It is MET-us listed for all MET-us listed L\u0026amp;L kilns.\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003eOptional Multi-Mounting Bracket\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eA special\u003cspan\u003e \u003c\/span\u003eMulti-mounting bracket (M-V-MULT\/00)\u003cspan\u003e \u003c\/span\u003eis available to mount the vent motor on the floor or point the outlet vertically for ceiling installations.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0010\/1931\/4239\/files\/part-vent-multi-bracket-600_large.jpg?v=1548088296\" alt=\"Vent-Sure Floor Mounting Bracket\"\u003e\u003c\/p\u003e \u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0010\/1931\/4239\/files\/accessories-vent-on-kiln-950_large.jpg?v=1548088297\" alt=\"Vent-Sure Floor Mounting Bracket Installed\"\u003e\u003c\/p\u003e \u003cmeta charset=\"utf-8\"\u003e \u003ch2\u003eOptional Vent Doubler\u003c\/h2\u003e \u003cp\u003eYou can get a\u003cspan\u003e \u003c\/span\u003eVent Doubler option (M-V-VENT\/DB)\u003cspan\u003e \u003c\/span\u003ewhich allow you to vent two kilns that are each up to 10 cubic feet.\u003c\/p\u003e \u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0010\/1931\/4239\/files\/accessories-vent-double-600_large.jpg?v=1548088296\" alt=\"Vent-Sure Vent Doubler\"\u003e\u003c\/p\u003e \u003cmeta charset=\"utf-8\"\u003e \u003ch2\u003eOptional Vent Controller To Turn Vent On And Off With DynaTrol\u003c\/h2\u003e \u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0010\/1931\/4239\/files\/accessory-vent-control-950_large.jpg?v=1548088297\" alt=\"Vent Controller\"\u003e\u003c\/p\u003e \u003cmeta charset=\"utf-8\"\u003e \u003cul\u003e \u003cli\u003eThe Vent Control will allow you to program the vent motor to turn on and off during the firing cycle.\u003c\/li\u003e \u003c\/ul\u003e \u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e \u003ch1 class=\"title\"\u003eVent-Sure for 220-240 Volts (Usually non-USA)\u003c\/h1\u003e \u003cp\u003eThis is the complete 220-240 volt Vent-Sure System. These are typically used in non-US installations such as in Europe.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWHAT IS INCLUDED\u003c\/strong\u003e\u003c\/p\u003e \u003col\u003e \u003cli\u003e\u003cspan\u003eOne wall-mounted blower mounted on a bracket with a 12\" long vent pipe to go through outside wall\u003c\/span\u003e\u003c\/li\u003e \u003cli\u003e\u003cspan\u003eOne Motor Inlet Duct\u003c\/span\u003e\u003c\/li\u003e \u003cli\u003e\u003cspan\u003eAn 6 foot power cord with an attached On\/Off switch plugs into a 240 volt standard receptacle (Plug depends on country - contact factory for details)\u003c\/span\u003e\u003c\/li\u003e \u003cli\u003e\u003cspan\u003eOne Bypass Collection Box to be mounted to the kiln or on the kiln stand, with mounting hardware\u003c\/span\u003e\u003c\/li\u003e \u003cli\u003e\n\u003cspan\u003eOne length of flexible aluminum ducting (expands to 15 feet) with two \u003c\/span\u003e\u003cspan\u003ehose clamps\u003c\/span\u003e\n\u003c\/li\u003e \u003cli\u003e\u003cspan\u003eOne 4” diameter 90 degree elbow (for outside the building)\u003c\/span\u003e\u003c\/li\u003e \u003c\/ol\u003e \u003cp\u003eModel: M-V-VENT\/EU\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNOTE: Vents made by manufacturers other than L\u0026amp;L may not be listed to UL499 standards if used with an L\u0026amp;L kiln. The same is true in reverse - the L\u0026amp;L Vent-Sure is listed to UL499 standards only with L\u0026amp;L listed kilns. If you have any question please contact the manufacturer of your non-L\u0026amp;L vent system.\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003ca target=\"_blank\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0010\/1931\/4239\/files\/Spec-Vent-Sure-2017.pdf?15073856172741737598\" rel=\"noopener noreferrer\"\u003eClick here for Specification Sheet\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca target=\"_blank\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0010\/1931\/4239\/files\/ventsure-instruct-print-11-1-2017.pdf?15073856172741737598\" rel=\"noopener noreferrer\"\u003eClick here for Instruction Manual\u003c\/a\u003e\u003c\/p\u003e \u003cul\u003e\u003c\/ul\u003e","published_at":"2019-01-22T17:08:00-06:00","created_at":"2019-01-22T17:08:01-06:00","vendor":"L\u0026L Kilns","type":"L\u0026L Vent-Sure","tags":[],"price":61625,"price_min":61625,"price_max":61625,"available":true,"price_varies":false,"compare_at_price":72500,"compare_at_price_min":72500,"compare_at_price_max":72500,"compare_at_price_varies":false,"variants":[{"id":13994104029247,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MVVENTEU","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Vent-Sure for 220-240 Volts (Usually non-USA)","public_title":null,"options":["Default Title"],"price":61625,"weight":454,"compare_at_price":72500,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/dulcemielevents.com\/cdn\/shop\/products\/accessories-vent-600_f32bbc84-5f0d-4e70-a795-8e93f9595469.jpg?v=1684767042","\/\/dulcemielevents.com\/cdn\/shop\/products\/accessories-installation-diagram-950_ea32ddd5-122a-42bd-912d-3b4804598b07.jpg?v=1684767042"],"featured_image":"\/\/dulcemielevents.com\/cdn\/shop\/products\/accessories-vent-600_f32bbc84-5f0d-4e70-a795-8e93f9595469.jpg?v=1684767042","options":["Title"],"media":[{"alt":null,"id":23439848439871,"position":1,"preview_image":{"aspect_ratio":1.181,"height":254,"width":300,"src":"\/\/dulcemielevents.com\/cdn\/shop\/products\/accessories-vent-600_f32bbc84-5f0d-4e70-a795-8e93f9595469.jpg?v=1684767042"},"aspect_ratio":1.181,"height":254,"media_type":"image","src":"\/\/dulcemielevents.com\/cdn\/shop\/products\/accessories-vent-600_f32bbc84-5f0d-4e70-a795-8e93f9595469.jpg?v=1684767042","width":300},{"alt":null,"id":23439848472639,"position":2,"preview_image":{"aspect_ratio":0.97,"height":979,"width":950,"src":"\/\/dulcemielevents.com\/cdn\/shop\/products\/accessories-installation-diagram-950_ea32ddd5-122a-42bd-912d-3b4804598b07.jpg?v=1684767042"},"aspect_ratio":0.97,"height":979,"media_type":"image","src":"\/\/dulcemielevents.com\/cdn\/shop\/products\/accessories-installation-diagram-950_ea32ddd5-122a-42bd-912d-3b4804598b07.jpg?v=1684767042","width":950}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"PLEASE NOTE: This factory installed upgrade\/option is only available for purchase as an upgrade or with a new kiln. It cannot be ordered without ordering an L\u0026amp;L kiln. \u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e \u003c\/p\u003e\u003ch2\u003eA Critical Component In The Longevity Of Your Kiln!\u003c\/h2\u003e \u003cp\u003eThe Vent-Sure automatic kiln vent helps prevent corrosion on the inside and outside of your kiln. It ensures that your kiln gets the longest possible life from your elements and electrical components. This is so important that, if you do not have a Vent-Sure installed on your kiln, the pro-rated element warranty is in a different category.\u003c\/p\u003e \u003ch2\u003eVent Blower\u003c\/h2\u003e \u003cul\u003e \u003cul\u003e \u003cul\u003e \u003cli\u003eThe vent blower motor is normally mounted with the 12\" outlet protruding through the wall.\u003c\/li\u003e \u003c\/ul\u003e \u003c\/ul\u003e \u003c\/ul\u003e \u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0010\/1931\/4239\/files\/parts-vent-assembly-600_large.jpg?v=1548088297\" alt=\"L\u0026amp;L Vent-Sure Components\"\u003e\u003cbr\u003e \u003cul\u003e \u003cul\u003e \u003cul\u003e \u003cli\u003eThis keeps the heat of the kiln away from the motor (for long motor life) and keeps the motor vibration away from the kiln (which can cause ware to move, damage to the kiln, and misfiring of cones on a Kiln Sitter - if you have one).\u003c\/li\u003e \u003c\/ul\u003e \u003c\/ul\u003e \u003c\/ul\u003e \u003ch2\u003eVacuum Is Safer Than Pressure\u003c\/h2\u003e \u003cul\u003e \u003cul\u003e \u003cul\u003e \u003cli\u003eThe vent tubing is kept under vacuum instead of pressure.\u003c\/li\u003e \u003cli\u003eThis insures that any leak in the tubing does not blow noxious fumes into your room.\u003c\/li\u003e \u003c\/ul\u003e \u003c\/ul\u003e \u003c\/ul\u003e \u003ch2\u003eExternal Venting Is Better\u003c\/h2\u003e \u003cul\u003e \u003cul\u003e \u003cul\u003e \u003cli\u003eExternal venting is safer and surer than venting to the inside of your kiln room (even with a filter).\u003c\/li\u003e \u003c\/ul\u003e \u003c\/ul\u003e \u003c\/ul\u003e \u003ch2\u003eLarge Capacity\u003c\/h2\u003e \u003cul\u003e \u003cul\u003e \u003cul\u003e \u003cli\u003e\u003cstrong\u003eThe blower vents up to 130 CFM (cubic feet per minute).\u003c\/strong\u003e\u003c\/li\u003e \u003cli\u003eThis will handle up to a 20 cubic foot kiln (and usually larger). More than one vent can be attached to a kiln.\u003c\/li\u003e \u003c\/ul\u003e \u003c\/ul\u003e \u003c\/ul\u003e \u003ch2\u003eMinimal Electrical Power Needed\u003c\/h2\u003e \u003cul\u003e \u003cul\u003e \u003cul\u003e \u003cli\u003eThe motor only pulls 1.37 amps.\u003c\/li\u003e \u003c\/ul\u003e \u003c\/ul\u003e \u003c\/ul\u003e \u003ch2\u003eSix Foot Power Cord With On\/Off Switch\u003c\/h2\u003e \u003cul\u003e \u003cul\u003e \u003cul\u003e \u003cli\u003eThe blower motor features a 6 foot long 120 volt 15 amp power cord. An On\/Off switch is located on the cord.\u003c\/li\u003e \u003cli\u003e240 volt models are available.\u003c\/li\u003e \u003c\/ul\u003e \u003c\/ul\u003e \u003c\/ul\u003e \u003ch2\u003eAdjustable Vent Control\u003c\/h2\u003e \u003cul\u003e \u003cul\u003e \u003cli\u003eA vacuum bypass on the kiln bypass\/collection box adjusts the amount of venting from the system.\u003c\/li\u003e \u003cli\u003eDon’t waste heat and energy by venting more than you need.\u003c\/li\u003e \u003cli\u003eAdjust vent to kiln size.\u003c\/li\u003e \u003c\/ul\u003e \u003c\/ul\u003e \u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0010\/1931\/4239\/files\/parts-vent-bypass-box-600_large.jpg?v=1548088297\" alt=\"Vent-Sure Collection Box\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0010\/1931\/4239\/files\/feature-stand-vent-bypass-box-no-hose-950_large.jpg?v=1548088296\" alt=\"Vent-Sure Collection Box\"\u003e\u003c\/p\u003e \u003cmeta charset=\"utf-8\"\u003e \u003ch2\u003e15 Feet Of Flexible Aluminum Duct\u003c\/h2\u003e \u003cul\u003e \u003cli\u003e15 feet of flexible expandable aluminum 3\" diameter duct is included along with necessary hose clamps.\u003c\/li\u003e \u003cli\u003eLonger lengths or lengths of 3\" stove pipe can be used as well.\u003c\/li\u003e \u003cli\u003eLength can be as great as 60 feet horizontal or vertical with up to four 90 degree bends.\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003eThree Year Limited Warranty\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eBecause of our unique wall-mount fan we rarely replace fan motors.\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003eMET Listed To UL499 Standards\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eThe VENT-SURE Model VS-1 is\u003cspan\u003e \u003c\/span\u003ec-MET-us\u003cspan\u003e \u003c\/span\u003elisted for use with all c-MET-us listed L\u0026amp;L kilns. It is MET-us listed for all MET-us listed L\u0026amp;L kilns.\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003eOptional Multi-Mounting Bracket\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eA special\u003cspan\u003e \u003c\/span\u003eMulti-mounting bracket (M-V-MULT\/00)\u003cspan\u003e \u003c\/span\u003eis available to mount the vent motor on the floor or point the outlet vertically for ceiling installations.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0010\/1931\/4239\/files\/part-vent-multi-bracket-600_large.jpg?v=1548088296\" alt=\"Vent-Sure Floor Mounting Bracket\"\u003e\u003c\/p\u003e \u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0010\/1931\/4239\/files\/accessories-vent-on-kiln-950_large.jpg?v=1548088297\" alt=\"Vent-Sure Floor Mounting Bracket Installed\"\u003e\u003c\/p\u003e \u003cmeta charset=\"utf-8\"\u003e \u003ch2\u003eOptional Vent Doubler\u003c\/h2\u003e \u003cp\u003eYou can get a\u003cspan\u003e \u003c\/span\u003eVent Doubler option (M-V-VENT\/DB)\u003cspan\u003e \u003c\/span\u003ewhich allow you to vent two kilns that are each up to 10 cubic feet.\u003c\/p\u003e \u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0010\/1931\/4239\/files\/accessories-vent-double-600_large.jpg?v=1548088296\" alt=\"Vent-Sure Vent Doubler\"\u003e\u003c\/p\u003e \u003cmeta charset=\"utf-8\"\u003e \u003ch2\u003eOptional Vent Controller To Turn Vent On And Off With DynaTrol\u003c\/h2\u003e \u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0010\/1931\/4239\/files\/accessory-vent-control-950_large.jpg?v=1548088297\" alt=\"Vent Controller\"\u003e\u003c\/p\u003e \u003cmeta charset=\"utf-8\"\u003e \u003cul\u003e \u003cli\u003eThe Vent Control will allow you to program the vent motor to turn on and off during the firing cycle.\u003c\/li\u003e \u003c\/ul\u003e \u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e \u003ch1 class=\"title\"\u003eVent-Sure for 220-240 Volts (Usually non-USA)\u003c\/h1\u003e \u003cp\u003eThis is the complete 220-240 volt Vent-Sure System. These are typically used in non-US installations such as in Europe.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWHAT IS INCLUDED\u003c\/strong\u003e\u003c\/p\u003e \u003col\u003e \u003cli\u003e\u003cspan\u003eOne wall-mounted blower mounted on a bracket with a 12\" long vent pipe to go through outside wall\u003c\/span\u003e\u003c\/li\u003e \u003cli\u003e\u003cspan\u003eOne Motor Inlet Duct\u003c\/span\u003e\u003c\/li\u003e \u003cli\u003e\u003cspan\u003eAn 6 foot power cord with an attached On\/Off switch plugs into a 240 volt standard receptacle (Plug depends on country - contact factory for details)\u003c\/span\u003e\u003c\/li\u003e \u003cli\u003e\u003cspan\u003eOne Bypass Collection Box to be mounted to the kiln or on the kiln stand, with mounting hardware\u003c\/span\u003e\u003c\/li\u003e \u003cli\u003e\n\u003cspan\u003eOne length of flexible aluminum ducting (expands to 15 feet) with two \u003c\/span\u003e\u003cspan\u003ehose clamps\u003c\/span\u003e\n\u003c\/li\u003e \u003cli\u003e\u003cspan\u003eOne 4” diameter 90 degree elbow (for outside the building)\u003c\/span\u003e\u003c\/li\u003e \u003c\/ol\u003e \u003cp\u003eModel: M-V-VENT\/EU\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNOTE: Vents made by manufacturers other than L\u0026amp;L may not be listed to UL499 standards if used with an L\u0026amp;L kiln. The same is true in reverse - the L\u0026amp;L Vent-Sure is listed to UL499 standards only with L\u0026amp;L listed kilns. If you have any question please contact the manufacturer of your non-L\u0026amp;L vent system.\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003ca target=\"_blank\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0010\/1931\/4239\/files\/Spec-Vent-Sure-2017.pdf?15073856172741737598\" rel=\"noopener noreferrer\"\u003eClick here for Specification Sheet\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca target=\"_blank\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0010\/1931\/4239\/files\/ventsure-instruct-print-11-1-2017.pdf?15073856172741737598\" rel=\"noopener noreferrer\"\u003eClick here for Instruction Manual\u003c\/a\u003e\u003c\/p\u003e \u003cul\u003e\u003c\/ul\u003e"}
Vent-Sure for 220-240 Volts (Usually non-USA)

Vent-Sure for 220-240 Volts (Usually non-USA)

€616.25 €725.00

PLEASE NOTE: This factory installed upgrade/option is only available for purchase as an upgrade or with a new kiln. It cannot be ordered without ordering an L&L kiln. A Critical Component In The Longevity Of Your Kiln! The Vent-Sure automatic kiln vent helps prevent corrosion on the inside and outside of your kiln. It ensures that your kiln...


More Info