- Home
- Skutt Parts Connectors and Wires
Skutt Parts Connectors and Wires
Skutt Insulated Feeder Wire – 12 AWG
€0.25
SOLD BY THE INCH. ORDERING A QUANTITY OF 10 WILL RESULT IN A 10 INCH LONG SECTION OF WIRE BEING SHIPPED.KPS Part Numbers 1000337 Skutt Part Numbers 0239R07076 Feeder wire is used to connect the element pigtails to the terminal strip and to wire the internal parts of the control box. Feeder Wire is nickle plated copper with a hi-temp jacket to ...
Skutt Female Tab – (Blue) for 14 AWG Wire
€0.40
KPS Part Numbers 1000330 Skutt Part Numbers 1922H17314 The Skutt Blue Insulated Female Tab connector is used for the harness wires on KM kilns without a new style 12 Gauge harness wire set installed. Connects the relays to the power cord terminal block and the relays to the wires leading to the terminal strip. Fits 14 AWG Feeder Wire, crimp on.
Skutt Insulated Feeder Wire – 10 AWG
€0.26
SOLD BY THE INCH. ORDERING A QUANTITY OF 10 WILL RESULT IN A 10 INCH LONG SECTION OF WIRE BEING SHIPPED.KPS Part Numbers 1000336 Skutt Part Numbers 2492P03076 Feeder wire is used to connect the element pigtails to the terminal strip and to wire the internal parts of the control box. Feeder Wire is nickle plated copper with a hi-temp jacket to ...
Skutt Ring Tongue Connector (KM harness wire to terminal strip) 12-10 AWG Wire
Connectors and WIre
Skutt Ring Tongue Connector (KM harness wire to terminal strip) 12-10 AWG Wire
€0.85
KPS Part Numbers 1000333 Skutt Part Numbers 2491H17314 The Skutt Yellow Ring Tongue connector is used on newer KM kilns to connect 10 Gauge wires to the back of the terminal strip. Crimp on.
Skutt Large Ring Tongue Connector for Power Cord for 6 AWG Wire
€1.00
KPS Part Numbers 1000331 Skutt Part Numbers 0059H17314 The Skutt Large Ring Tongue connector is used to connect the power cord to the single phase terminal block in KM kilns. Crimp on. Not for the ground wire.
Skutt Female Tab – (Yellow) for 12-10 AWG Wire
€1.15
KPS Part Numbers 1000329 Skutt Part Numbers 2490H17314 The Skutt Yellow Insulated Female Tab connector is used for the harness wires on KM kilns to connect the relays to the power cord terminal block and the relays to the wires leading to the terminal strip. Fits 12-10 AWG Feeder Wire, crimp on.
Skutt C53 Flag Lug
€1.50
KPS Part Numbers 1000328 Skutt Part Numbers 0007A25314 The Skutt C53 Flag Lug is used to connect the wires from the elements to 3-heat switches on most KS (Manual) kilns. Kilns that use Infinite Switches rather than 3-Heat switches do not use these connectors.
Skutt Insulated Feeder Wire – 14 AWG
€0.20
SOLD BY THE INCH. ORDERING A QUANTITY OF 10 WILL RESULT IN A 10 INCH LONG SECTION OF WIRE BEING SHIPPED.KPS Part Numbers 1000338 Skutt Part Numbers 0288N01076 Feeder wire is used to connect the element pigtails to the terminal strip and to wire the internal parts of the control box. Feeder Wire is nickle plated copper with a hi-temp jacket to ...
Skutt Ring Tongue Connector (KM harness wire to terminal strip) 14 AWG Wire
Connectors and WIre
Skutt Ring Tongue Connector (KM harness wire to terminal strip) 14 AWG Wire
€0.90
KPS Part Numbers 1000334 Skutt Part Numbers 1923H17314 The Skutt Blue Ring Tongue connector is used on older KM kilns to connect 14 Gauge wires to the back of the terminal strip. Crimp on.
Skutt Insulated Feeder Wire – 8 AWG
€0.43
SOLD BY THE INCH. ORDERING A QUANTITY OF 10 WILL RESULT IN A 10 INCH LONG SECTION OF WIRE BEING SHIPPED.KPS Part Numbers 1000335 Skutt Part Numbers 2202N01076 Feeder wire is used to connect the element pigtails to the terminal strip and to wire the internal parts of the control box. Feeder Wire is nickle plated copper with a hi-temp jacket to ...
Skutt Small Ring Tongue Connector for Power Cord for 8 AWG Wire
€0.95
KPS Part Numbers 1000332 Skutt Part Numbers 0999H17314 The Skutt Small Ring Tongue connector is used to connect the power cord ground wire to the metal control box in KM kilns. Crimp on.