{"product_id":"mayco-fn052","title":"Mayco – Cone 06 - FN-052 Tangerine","description":"\u003cbody\u003e \u003cp\u003e\u003cstrong\u003ePRODUCT DESCRIPTION\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eFoundations glazes are available in a broad assortment of colors, opacities and textures. They easily serve as the basic \"foundation\" glaze for any ceramic studio - be that in a school, home or retail studio. Stock numbers that contain the prefix “FN-0XX” are opaque glazes, those with the prefix “FN-2XX” are Sheer (transparent and semi transparent glazes), while those that have the prefix “FN-3XX are Matte glaze.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eProduct Features and Attributes\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNon-toxic, non-hazardous and food safe\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eSelf Leveling Formula\u003c\/strong\u003e - glaze glides smoothly on bisque; no brush strokes will appear in the fired finish\u003cbr\u003e \u003cstrong\u003eSteadfast Application\u003c\/strong\u003e - Foundations will not dissolve or \"pick up\" previous coats of glaze\u003cbr\u003e \u003cstrong\u003eStable, Non Moving Base\u003c\/strong\u003e - perfect for decorating upon, as with Majolica techniques\u003cbr\u003e \u003cstrong\u003eIntermixable\u003c\/strong\u003e - new shades can be created by mixing Foundation glazes with each other\u003cbr\u003e \u003cstrong\u003eDries Quickly\u003c\/strong\u003e - speeds up your ability to handle or perform additional decorating\u003cbr\u003e \u003cstrong\u003eHigh Gloss Finish\u003c\/strong\u003e - does not need to be clear glazed\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eApplication Recommendations:\u003cbr\u003e \u003c\/strong\u003e\u003cem\u003eThe following application recommendations are based upon the original product development intent and use for the product.\u003c\/em\u003e\u003cbr\u003e \u003cbr\u003e Information on alternative application methods is listed in the section \"Usage Variations and FAQ's\".\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eShake for 5-6 seconds before use.\u003c\/strong\u003e Dispense glaze onto a palette (tile, plate, etc.) and apply with your brush or decorating accessory of choice (sponge, stamp, etc.).\u003c\/p\u003e \u003cp\u003eFoundations Opaque glazes were designed to mature at a shelf cone 06 (999° C). When applying Foundations over a large surface area we recommend a broad, soft brush, such as a CB-604 #4 Soft Fan Brush. Try to get the brush fully saturated (loaded) and apply each coat in the same direction.\u003c\/p\u003e \u003cp\u003eMake sure the glaze has dried thoroughly prior to firing. A medium ramp\/firing rate is recommended (250°F per hour).\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eUSAGE VARIATIONS AND FAQ’S\u003c\/strong\u003e\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDesign Details Preserved\u003c\/strong\u003e\u003cbr\u003e Foundation Opaques perform well as a base color on which detailed design work can be laid.\u003cbr\u003e They are a little more fluid that Stroke \u0026amp; Coat®, but design integrity will remain after firing.\u003c\/p\u003e \u003cp\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAll Over Coverage\u003c\/strong\u003e\u003cbr\u003e Not only do you get great coverage with just 2-3 coats but the cost-per-ounce makes Foundations one of the best economic choices for large volume, large areas uses.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFoundation glazes are non-toxic and food safe - perfect for food surfaces.\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e\u003cbr\u003e \u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Can Foundations be applied to greenware or clay? \u003c\/strong\u003e\u003cbr\u003e A: Mayco has tested the Foundations Opaque glazes on clay with successful results. Apply 2-3 coats of Foundations over the entire piece, leaving an area unglazed such as a back or bottom to allow for outgassing. Clay should be totally dry before firing. Fire to shelf cone 04 (1060° C).\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Can Foundations be fired to higher temperatures (cone 6 and above)? \u003c\/strong\u003e\u003cbr\u003e A: Many Foundations Opaques can be fired to cone 6. Darker colors - green, red, blue, orange, purple - will maintain much of their original color value (they may darken a bit compared to cone 06 results). Lightly pigmented colors - pink, yellow, tan, lighter purples - will fade. Always test to see if this application variance will work on your specific project.\u003c\/p\u003e \u003c\/body\u003e","brand":"Mayco Coloramics","offers":[{"title":"4oz. - Stock Item, Normally ships in one business day","offer_id":40823716479039,"sku":"FN052-4","price":6.0,"currency_code":"EUR","in_stock":true},{"title":"Pint - Stock Item, Normally ships in one business day","offer_id":40823716511807,"sku":"FN052p","price":14.25,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0010\/1931\/4239\/files\/FN52_Tangerine_c4d1809a-6925-40e2-bfc4-087cbb119d99.jpg?v=1715457186","url":"https:\/\/dulcemielevents.com\/products\/mayco-fn052","provider":"dulcemielevents","version":"1.0","type":"link"}