Vendor: Duncan Ceramics
Type: Duncan Cone 019-018 OG Overglazes
Price:
5.80
Essence is a must-have cleaning solution for all of your brushes and tools used with Duncan Overglazes. Other cleaning agents may contain water or solvents, resulting in the separation of overglaze during subsequent applications.
Vendor: Duncan Ceramics
Type: Duncan Cone 06-6 FD French Dimensions
Price:
3.60
Vendor: Duncan Ceramics
Type: Duncan Cone 06-6 FD French Dimensions
Price:
3.60
Vendor: Duncan Ceramics
Type: Duncan Cone 019-018 OG Overglazes
Price:
52.00
Vendor: Duncan Ceramics
Type: Duncan Cone 019-018 OG Overglazes
Price:
6.20
Vendor: Duncan Ceramics
Type: Duncan Cone 019-018 OG Overglazes
Price:
32.00
Vendor: Duncan Ceramics
Type: Duncan Cone 019-018 OG Overglazes
Price:
32.00
Vendor: Duncan Ceramics
Type: Duncan Cone 06 PB Pure Brilliance
Price:
29.20 - 68.00
(2 variants)
Brush-On Formula:
Mix clear glaze with palette knife.
Sponge Application: Dab a clean sponge into glaze and dab one coat over colors on surface of bisque to cover. After the sponged coat has dried thoroughly, load glaze brush with glaze and brush on two coats. Allow to dry between coats.
Brush Application: Load a glaze brush with glaze and apply two flowing coats. Let dry between coats.
Let ware dry thoroughly. Set ware securely on clean, sharp stilts in kiln. Fire to cone 06.
Vendor: Duncan Ceramics
Type: Duncan Cone 06 PB Pure Brilliance
Price:
29.20 - 68.00
(2 variants)
Dipping Glaze Formula:
Initially mix with electric mixer for no more than 2 minutes. A stainless steel wire whisk can be used to stir glaze periodically.
Submerge a TL 497 Viscosity Cup into tank and fill with glaze. As you lift cup from glaze, begin timing. Stop timing when stream of glaze begins to break. A range of 19-24 seconds is normal. Add small amounts of water as needed (4 oz. at a time).
Hold ware with hands or dipping tongs. If using hands, wear protective gloves. As you remove ware shake away any drips or runs. Do not finger sand the piece as this can cause airborne dust.
If necessary on larger piece, dip unglazed portion, slightly overlapping glazed area for full coverage. Let dry.